Hot tag: faq center
  • Q:Access to food glue reports


  • Q:Crystal Epoxy AB glue is a two-component preparation of

    Crystal Epoxy AB glue is a two-component preparation of
    Crystal Epoxy products in Figure
    . With low viscosity, high transparency, yellowing resistance, fracture resistance. Crystal Epoxy divided into the following categories: 1. Shui Jingjiao soft: it is a two-component liquid with a high degree of transparency, not contraction, not warped, good flexibility and bending resistance, not broken, resistant to yellowing and other characteristics. Applicable to trademarks, signs, electronics, electrical appliances surface decoration. Two. Rigid crystal glue: it is a two-component liquid, high transparency, high hardness, apply to the surface decoration of the badges, nameplates and other products. 3. Arc plastic: It is a two-component liquid mixture can be mixed with a variety of epoxy creams. For the hairpin, the first flowers crafts
    King Shun Crystal Epoxy - renderings
    Surface decoration, to make our products to life, adding to market competitiveness. 4. Polished plastic: It is suitable for surface decoration of the belt of the mouth, buttons, key chain and other hardware products, grinding, polishing, plating. 5 PU glue: it is a two-component polyurethane mixture liquid, Resistance of the best, not broken, anti-yellowing cycles up to three years or more, no abnormal changes in the late hardness applies to high-end electronics, electrical signs surface of the product decoration.
    Edit this paragraph two, crystal glue instructions for use
    A soft crystal dispensing method of operation:
    ① ready to use container and dry cleaning signs. ② will be required for Shui Jingjiao A and B groups in a 3:1 ratio weighed (A plastic 3 B plastic copies), Group A is heated to about 40 ℃, and then joined the group B into the container Stir eliminate air bubbles (vacuum, vacuum pump Model 2X-4. See the schematic.)
    Arts l Crystal Epoxy Legend
    # 1 bottles, to protect the vacuum pump effect. # 2 for keeping off the Shui Jingjiao of the bubble. 1 # 2 # are filtering flask (glass apparatus around the store to buy the glue evenly drop on the plate with a small beaker or syringe) ③ defoaming edge of such signs Shui Jingjiao drip (basic can come) used a small needle struck, so the glue evenly on the surface. (4) Gel Curing: After coating the plate, the gel time of about room temperature 25 ° C for 3 hours; curing time is about room temperature for 36 hours. Or signs after the coating well into the constant temperature of 60 ° C in the drying box, and 3 hours to fully cure. ⑤ If the customer has special requirements, gel curing time and curing rubber soft, hard-appropriate deployment according to customer requirements. ⑥ glue deployment, customer self-control, the remaining glue not exceed 1 hour.
    2, thermosetting rigid crystal glue method of operation:
    ① configuration preparation as above. ② will be required for the Shui Jingjiao A and group B after a 3:1 weighing Stir, you can drop on the plate. ③ gel solid: painted signs placed in the oven about 60 ℃ for heating and 1.5 hours; or at room temperature for 13 hours or so since dry.
    3, the method of operation of the PU polyurethane Shui Jingjiao:
    ① configuration required for the the PU Shui Jingjiao A and B groups, ready 100:100 weighing ibid. ② will be required for the Shui Jingjiao A and group B after a 1:1 weighing Stir, you can drop on the plate. ③ hand drops PU speed slower, the higher the ambient humidity, relative humidity between 40 to 60, will not cause post-foaming. The recommendations PU Shui Jingjiao dispensing machines, methods, see the dispenser manual.
    Edit this paragraph, storage and precautions
    1, the use and preservation should avoid direct sunlight exposure and exposure to high temperatures to prevent the jelly. Generally stored in a cool dark place of 25 ℃, especially in the summer, the best low temperature storage. 2, Crystal storage period is generally six months, more than 6 months with good performance can still be used. 3, use the configuration Shui Jingjiao encounter remaining glue, do not pour back to the original packaging is not configured, so as not to react to the role of cause jelly phenomena. 4, the use of syringes, beakers and other containers can be used acetone. Alcohol. 5: can not add other thinner with plastic, so as not to reduce the intensity.
    Edit this paragraph four, and processing
    Encountered surface waterlines to pay more attention to the mixing time, must be uniform. 2, if the rubber when received, stacked there will be sticky substrate phenomena have re-heated bake until dry. 3, Epoxy, such as leakage of glue from a large area, indicating that the thickness of the plastic beyond the area under the Service be able to be thinned!
    Edit this paragraph, storage and packaging
    Crystal glue required in ventilated, cool, dry place seal preservation, shelf life of 180 days, expired by passing the test may continue to use; 2, packaging specifications for each group of 15kg, which contains the main agent of 10kg / barrel, curing agent 5kg / barrel.
    Reference material

  • Q:Why film class labels?


    Why film class labels?

    Our wide range of paper labels, film-like material product range,these filmic label materials in the home and personal careproducts industry, more and more popular. They embodied the many advantages of the various stages in the labeling processand product life cycle. As a result of the printing process and to adapt to a variety of coating and printing easier. We use the most appropriate at the end of the paper, to ensure the bestcutting results and register accuracy.

    The performance of its special class label film means that wecan quickly bids. After the paste to the product label durability,will not shrink over time. In short, the film class labels to broadenyour range of options, is an excellent alternative to paper labels.

    PE film production:

    Production of polyethylene (PE) films using blown filmcoextrusion process. First of all, with a screw through the ring dieextrusion of molten polymers. Hot-film air bubbles through the aircooled to the crystallization temperature about. At the same time,it is set vertical and horizontal stretching, the bubble diameter and film thickness.
    Modern production equipment can automatically control the film thickness adjustment device. Processes, several extrudermultilayer films can be processed simultaneously.

    PE film advantages:

    Our polyethylene (PE) film is highly flexible, which means itsexcellent tear resistance, and resistance to extrusionperformance. The home and personal care products market is often used containers of various shapes, so this material is undoubtedly the ideal choice. In order to meet differentprocessing needs, we offer a variety of different surface treatment of PE through the film. If mixed with other polyolefins,they can be completely recycled.
    DU/RP37/01 uncoated white PE 85/RP37 / White Glassine at the end of 65
    DX/RP37/01 uncoated transparent PE 85/RP37 / WhiteGlassine at the end of 65
    E3 / RP37/01 white coated PE 85/RP37 / White Glassine at the end of 65
    H5 / RP37/01 Silver-coated PE 85/RP37 / White Glassine at the end of 65
    E6/RP37/01 transparent coating PE 85/RP37 / White Glassineat the end of 65
  • Q:What is the minimum label order?

    Our minimum physical label printing production order is 2M(2000) labels .The economically practical minimum is 5M in most cases.

  • Q:What are printing plates?

    Plates are images that are created from the negatives which are used to transfer the ink to the surface to be printed each color requires a separate printing plate.

  • Q:Why are some price quotes unusually lower compared to the others received?

    Two of the major reasons are the use by some converters of off-grade materials obtained at much lower costs and /or near non-existent quality controls . Of course ,lower labor or overhead costs can also be a factor according to region and type of labor talent used . Such factors can result products that fail to perform properly or are never the same two times in a row . Remember don’t expect what you don’t inspect!

  • Q:What are "overs" or "unders"?

    In the label industry-as in most of printing-the actual quantity of product delivered may vary + or – 10% from the quantity ordered because extras are produced to provide for what may need to be culled out in the quality review process You are then billed only for the actual quantity shipped.

  • Q:What is a proof? Or, do I need to see a proof?

    This is an evidence of what the printed product will look like prior to printing . It is your opportunity to review the wording spelling , size and position of the label design. As our proof to you. We furnish a PDF file at no charge for your review , correction and approval . A proof approval is required prior to any production . It is possible to obtain a hard-copy proof for a small fee, if desired. A proof can be corrected or changed prior to printing and should not be bypassed because of delivery urgency.

  • Q:How can I be assured my labels will stick properly to the surface?

    Prior to ordering always request sample material to test on the surface(s) to be labeled or to check out the automatic labeling process . If you are unsure of your own requirement , send a few samples or your product to your label printer for him to recommend both appropriate adhesive as well as proper face materials.

  • Q:What shapes can we die-cut?

    We can die cut different shape according to customer’s requirement.

  • Q:Who will make my label artwork?

    Anyone with professional prepress art talent such as agencies , freelance commercial artists , or the printer you are using . Our company can also create some simple artwork needed for an art charge.

  • Q:What is considered typical delivery for a custom printed label?

    A. This can vary by manufacturer but is usually dependent on three factors:

    1.Quantity size of the run.
    2.Complexity or Special Requirements (such as special materials, inks, dies, etc.)
    3. If there is enough time or not for delivery .

    The best answer is to check with your vendor and see if he can accommodate you even with a partial shipment if necessary.

  • Q:What is artwork?

    It is the layout of design wording (copy) and/or images that are necessary to create negatives and printing plates.

  • Q:What does four color process mean?

    Four color process describes the printing process that is used today to print the full color that you see in magazines, newspapers, brochures and labels. Basically a color image is separated into the four primary colors: Cyan, Magenta, Yellow and Black (known as CMYK) by the use of filters and screens. The result is a color separation of four images that when printed make up the full color image.

  • Q:what is the printing range?

    A. the longest of roll label we can print is 38mertre .The longest of sheeting label is 1.02metre.
    B. the shortest of roll label we can print is 2.46metre ; The shortest of sheeting label is 0.2metre.
    C. the widest of roll label we can print is 28CM.The widest of sheeting label is 1.01metre.


Do You Have Questions About Labels in General?

If you don't find the answer to your question in our Custom Labels and Stickers FAQ, try one of these options:

Visit our websit and chat with us on MSN or QQ

Send us an Email